table of content:
Geysir Bedpan Washer – Cleaning and Disinfection That Leaves No Questions Unanswered
Bedpan washers are used in care facilities and hospitals and are Class IIa medical devices—not just accessories, but a critical component of the hygiene protocol. Choosing the wrong equipment not only compromises compliance with standards but also jeopardizes the safety of patients and staff.
The Geysir series from LISCHKA combines thermal disinfection in accordance with EN ISO 15883-1/3 with a design developed from decades of experience in the German hospital and healthcare market. Compact. Low-maintenance. Made in Germany.
All Geysir bedpan washers are Class IIa medical devices. Thermal disinfection—the safest method according to RKI recommendations and current standards.
CDD 1050
The Geysir CDD 1050 is a versatile, space-saving combination appliance with a large washing chamber and ergonomic loading height. This easy-to-use model can be used to meet almost all standard and even special installation requirements.
It impresses with its compact design. It has integrated space for up to 2x5L chemical containers. The Geysir CDD 1050 is the right choice when it comes to effectively and efficiently reprocessing utensils in accordance with the latest hygiene regulations, even in the smallest of spaces.
Technical data CDD 1050
| Cold water: | 5-35°C | Electrical connection: | 400V 3N/PE (50/60Hz) |
| Connection: | R3/4″ | Nominal power: | 4,85kW |
| Flow rate: | 18l/min | Fuse: | 10A |
| Water pressure: | 0,8 – 8bar | Alternate | |
| Hot water | 40-60°C | Electrical connection: | 230V 1N/PE (50/60Hz) |
| Connection: | R3/4″ | Nominal power: | 3,85kW |
| Flow rate: | 18l/min | Fuse: | 16A |
| Water pressure: | 0,8 – 8bar | Cable length: | 1200mm |
| Drainage: | DN100 | ØNoise emission LpA: | 50dB |
CDD 1060
The Geysir CDD 1060 is the smallest compact device in the Geysir series. Small in size yet effective and efficient in cleaning, these are the impressive features of this device. The use of this narrow model with an unchanged large washing chamber guarantees the most optimal use of space in terms of the equipment of the work care combination. The Geysir CDD 1060 is the right choice when it comes to effectively and efficiently reprocessing utensils in accordance with the latest hygiene regulations, even in the smallest of spaces, without compromising on the working height of 900 mm.
Technical data CDD 1060
| Cold water: | 5-35°C | Electrical connection: | 400V 3N/PE (50/60Hz) |
| Connection: | R3/4″ | Nominal power: | 4,85kW |
| Flow rate: | 18l/min | Fuse: | 10A |
| Water pressure: | 0,8 – 8bar | Alternate | |
| Hot water | 40-60°C | Electrical connection: | 230V 1N/PE (50/60Hz) |
| Connection: | R3/4″ | Nominal power: | 3,85kW |
| Flow rate: | 18l/min | Fuse: | 16A |
| Water pressure: | 0,8 – 8bar | Cable length: | 1200mm |
| Drainage: | DN100 | ØNoise emission LpA: | 50dB |
CDD 1090
The Geysir CDD 1090 is a large, practical device. It is also fully under-counter compatible and has integrated space for up to 2 x 5 litre chemical containers. By installing a hand wash basin in the worktop above the unit, it can be easily integrated into work care combinations without losing the optimum working height of 900 mm. It thus blends harmoniously into the room. The Geysir CDD 1090 is the right choice when it comes to effectively and efficiently preparing utensils in accordance with the latest hygiene regulations and you need an all-rounder.
Technical data CDD 1090
| Cold water: | 5-35°C | Electrical connection: | 400V 3N/PE (50/60Hz) |
| Connection: | R3/4″ | Nominal power: | 4,85kW |
| Flow rate: | 18l/min | Fuse: | 10A |
| Water pressure: | 0,8 – 8bar | Alternate | |
| Hot water | 40-60°C | Electrical connection: | 230V 1N/PE (50/60Hz) |
| Connection: | R3/4″ | Nominal power: | 3,85kW |
| Flow rate: | 18l/min | Fuse: | 16A |
| Water pressure: | 0,8 – 8bar | Cable length: | 1200mm |
| Drainage: | DN100 | ØNoise emission LpA: | 50dB |
Customized
Work care combinations
At Lischka you get the perfect combination of bedpan washers and medical furniture with our Geysir work care combinations.
CDD 1050 E / CDD 1050 EWC
The Geysir CDD 1050 E is suitable for wall mounting and offers an ideal solution for a proper instalation in the wall. Above the unit there is a cabinet for storing chemical canisters. The Geysir CDD 1050 EWC also offers the option of integrating a wall-mounted, commercially available WC and is therefore perfect for equipping ICU and isolation rooms. A toilet cistern and the flush button are already included in this design.
Technical data CDD 1050 EWC
| Cold water: | 5-35°C | Electrical connection: | 400V 3N/PE (50/60Hz) |
| Connection: | 1x R3/4″ | 1x 3/8″ | Nominal power: | 4,85kW |
| Flow rate: | 18l/min | Fuse: | 10A |
| Water pressure: | 0,8 – 8bar | Alternate | |
| Hot water | 40-60°C | Electrical connection: | 230V 1N/PE (50/60Hz) |
| Connection: | R3/4″ | Nominal power: | 3,85kW |
| Flow rate: | 18l/min | Fuse: | 16A |
| Water pressure: | 0,8 – 8bar | Cable length: | 1200mm |
| Drainage: | DN100 | ØNoise emission LpA: | 50dB |
Which model suits your interior?
The most common question when buying: freestanding or undersink appliance? Single-function or combination appliance? The Geysir series offers the right solution for any space—without compromising on cleaning performance or capacity.
| model | suits for | Distinctive feature |
|---|---|---|
| CDD 1050 | Stations with moderate traffic, narrow spaces, freestanding | Freestanding unit, compact, ergonomic loading height, built-in space for two 5-liter chemical containers |
| CDD 1060 | Small-scale care facilities, retrofitting, renovation | The narrowest model in the series – maximum use of space, full washing performance |
| CDD 1090 | Large-capacity facilities and storage | Under-counter unit with a large wash chamber, ideal for use in combination with a built-in hand wash basin, with space for two 5-liter chemical containers |
| CDD 1050 E / EWC | In-wall installation, new construction, maximum space requirements | Wall-mounted unit, seamlessly integrated; also available as a toilet combination |
All devices feature the same spacious wash chamber
What matters most to you?
• Class IIa medical device – compliant with EN ISO 15883-1/3
• Made in Germany – predictable spare parts supply and service availability
• Low-maintenance design – reduced operating costs over the life cycle
• Multiple models – the right size for every installation situation
• Stainless steel housing and steaming components made of V2A – durable and easy to clean
• 400V 3N/PE or 230V 1N/PE connection (depending on model) – flexible installation options
• Ø100 drain – standard connection without special dimensions
• Service documentation, training, and validation support available upon request
• Easy to use – fewer sources of error in daily routine
• Closed reprocessing cycles – no contact with fecal matter for staff
• Low noise level (≤ 50 dB) – can also be used in areas close to patients
• Short cycle times – quick availability of cleaned and disinfected careware
Why choose a bedpan washer from Lischka?
The market for bedpan washers is relatively small—but the differences between manufacturers are not. Anyone considering a purchase is right to ask: What justifies this choice?
+ Patented cleaning system
The Geysir series of bedpan washers features a multifunctional power jet system for effective cleaning and patented recirculation cooling. The result: consistently clean and reproducible results without the need for chemicals—even with delicate careware and heavily soiled items.
+ Maintenance-free labyrinth door seal
One of the most common causes of breakdowns in bedpan washers is the door gasket. Thanks to their design, LISCHKA models do not require this maintenance—which lowers operating costs and reduces downtime.
+ customizable wash cycles
Different facilities, different requirements. Geysir devices offer freely adjustable cleaning and disinfection levels—even for heightened hygiene requirements (e.g., isolation wards, outbreak situations).
+ Manufactured and certified in Berlin, distributed worldwide
Lischka GmbH develops and manufactures its products in Berlin. This means short communications channels, direct points of contact, and service technicians based in Germany. In other countries, we have a network of partner companies for sales and maintenance.
+ Market experience
We don't just supply equipment; we also offer expert advice based on our many years of experience in operations, planning, and processing. From individual purchases to complete maintenance packages.
+ Consulting, Planning, Offer
Whether you're looking for a single unit, a retrofit, or a complete maintenance system—we'll be with you every step from the first inquiry to the final installation. Get in touch with us.
Frequently asked questions (FAQ)
This depends primarily on the available floor space and the daily workload.
CDD 1050 for stations with normal workload and standard room size. Freestanding and ergonomically designed for loading and unloading.
CDD 1060 for very tight spaces under a countertop; ideally suited for retrofitting.
CDD 1090 for high turnover under a worktop, in combination with storage systems for care utensils. Additional storage for chemical canisters inside the device.
CDD 1050 E/EWC for wall-mounted installation with or without a toilet mounted in front. Ideal for modern nursing homes or isolation stations.
We would be glad to advise you based on your floor plan and requirements.
Yes, bedpan washers are generally Class IIa medical devices and have to be certified.
The GEYSIR series of bedpan washers are available in the following dimensions: WxDxH 500x450x1775 mm (CDD 1050), 500x600x1775 mm (CDD 1050), 600x600x1200 mm (CDD 1060 basic), 600x560x860 mm (CDD 1060 classic, under-counter compatible), 900x560x900 mm (CDD 1090 classic, under-counter compatible), and 900x600x900 mm (CDD 1090 basic). All units feature the same wash chamber.
Since bedpan washers are essentially pieces of medical equipment, they must be serviced once a year. During this maintenance, the legally required measurements in accordance with DGUV regulations are also performed, along with a measurement to verify the A0 value are also performed.
The GEYSIR series bedpan washers feature a storage rack that is directly accessible after opening the washing clamp door and can be loaded very easily and intuitively loaded.
Bedpans, urinals, commode buckets – all standard reusable care equipment made of stainless steel or plastic.
Thanks to the maintenance-free labyrinth door seal, one frequent maintenance task is eliminated. However, nozzle cleaning and routine maintenance in accordance with the manufacturer's specifications must still be performed. We offer maintenance contracts.
In most cases, yes – the Geysir series is designed for standard connection dimensions. For older or non-standard installations, we will work with you to assess feasibility on-site.
Early involvement saves costs. LISCHKA GmbH provides consulting services for the planning of nursing care spaces—from room layout and wiring to the selection of the right model. Please contact us early on.
The GEYSIR series of bedpan washers monitor all reprocessing steps within the device itself, and only when all reprocessing parameters have been met are the utensils cleared for removal.
Yes. We offer maintenance and service contracts for all Geysir appliances. Our service team is available throughout Germany.
Thermal disinfection in a bedpan washer is a method based on the intense heating of the items to be disinfected using steam — for example, care equipment such as bedpans, stool buckets, and urine bottles. The effect of the steam reduces the bacterial count on the surface of the utensils to a level that makes the transmission of infection unlikely. In an automatic cleaning and disinfection device (CDD) such as the GEYSIR bedpan washer, the objects are disinfected with steam and heat for a defined holding time. The disinfecting effect on pathogens can be determined using the A0 value – it mathematically relates the exposure temperature and holding time.
The A0 value defines the intensity of thermal disinfection and thus the inactivation of pathogenic microorganisms. The GEYSIR series offers maximum flexibility in this regard and can be adjusted to meet specific needs. With a value ranging from 600 to 3000 in accordance with the standard, it ensures proper disinfection of care utensils—regardless of the risk class to which the respective items are assigned.
If you have any questions, please do not hesitate to contact our sales department using our contact form .